Motor DE Bearing Failure for Electric Motor
Vibration measurements during commissioning revealed bearing failures in four out of twelve new motors, likely due to improper storage conditions.
Like what you see?
Sign up to share your own knowledge, like posts, and engage with the community!
Flotation plant during the commissioning phase, 12 new 75 kW electric motors were measured for vibration and 4 of them had bearing failures. When they were disassembled for inspection, bearing marks from waiting were observed.
During the waiting periods of rotating equipment, it is important to move the motor, reducer and bearings at certain intervals and keep them away from environments such as humidity, heat and dust to avoid such bad scenarios
Additional Images
Post Information
Category:
Vibration Case Study
Language:
English
Reading Time:
1 min
Tags
Original Authors
Özgür Bilgiç
Source:
https://www.lin...