Kiln String Fan Electrical Leakage and Bearing Failure
A bearing defect in the kiln string’s motor was identified and addressed by installing insulated bearings during a shutdown, extending the equipment’s lifespan.
Like what you see?
Sign up to share your own knowledge, like posts, and engage with the community!
I am pleased to present an enhanced case study concerning the kiln string (Preheater fan), where a bearing defect in the motor's non-drive end (NDE) was earlier identified. Preventive actions were implemented to address this issue, aiming to extend the equipment's lifespan. The root cause of the failure was determined, and appropriate preventive measures were recommended, including the installation of insulated bearings in the motor to prevent recurrent failures. During the subsequent shutdown, the concerned team successfully replaced the bearing with an insulated one.
Additional Images
Attachments
Post Information
Category:
Vibration Case Study
Language:
English
Reading Time:
1 min
Tags
Original Authors
Manimala Venkatesh
Source:
https://www.lin...